8
PM1A
LEDs
1
2
3
4
1. Indicates High ‘Voltage present in output terminals.
2. Indicates battery charger is operating.
3. Indicates the unit of measured value showed in the display.
4. Indicates the selected test voltage.
WARNING:
Do NOT connect the test leads during the measurement or when the HV LED
is lit.
Power Supply
The PM1A uses a rechargeable Ni-MH battery for power (4 x 1.2 V)
WARNING
: Use ONLY rechargeable batteries, Ni-MH AA size, 1.2 V each, with a
capacity of 1.3 Ah up to 2.5 Ah. It is dangerous to use any other type of batteries
!