WAS-105R IEEE802.11n Wireless Hotspot Gateway
Quick Installation Guide
8
3. Getting Started
Step :
1. Once the hardware installation is done, set DHCP in TCP/IP of the administrator's PC to get an IP
address automatically. Connect the PC to the LAN(PoE) port of WAS-105R. An IP address will be
assigned to the PC automatically via the WAS-105R.
2. Launch a web browser to access the web GUI of WAS-105R by entering “http://192.168.2.254” in the
address field.
3. The following Administrator Login Page will appear. Enter “
root
” in the Username field, and “
default
”
in the Password field.
4. After a successful login, the “Home Page” will appear on the screen.
If you can't get the login screen, you may have incorrectly set your PC to obtain an IP address
automatically from LAN port or the IP address used does not have the same subnet as the URL.
Please use default IP address such as 192.168.2.xx in your network and then try it again.
