PheeNet IEEE802.11n, Руководство пользователя

Страница: 80 / 142

71
value unless you know what will happen after
modification.
N Data Rate (6): Same as above, but only for 802.11n clients.
Channel Width (7): Set channel width of wireless radio.
Do not modify
default value if you don’t know what it is, default
setting is ‘Auto 20/40 MHz’.
Preamble Type (8): Set the type of preamble,
do not modify default
value if you don’t know what it is, default setting is
‘Short Preamble’.
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your
wireless router (set the option to ‘Disable’), so only
people those who know the ESSID of your wireless
router can get connected.
CTS Protect (10): Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g/n
wireless access points. It’s recommended to set this
option to ‘Auto’ or ‘Always’. However, if you set to
‘None’, your wireless router should be able to work
fine, too.
Tx Power (11):
You can set the output power of wireless radio.
Unless you’re using this wireless router in a really
big space, you may not have to set output power to
100%.
This will enhance security (malicious /
unknown users in distance will not be able to
reach your wireless router).
WMM (12): The short of Wi-Fi MultiMedia, it will enhance the
data transfer performance of multimedia contents
when they’re being transferred over wireless
network.
If you don’t know what it is / not sure if
you need it, it’s safe to set this option to ‘Enable’,