8
6
6.5 IR Cable Pin Assignment
3
1
3
1
2
2
Power 5 V
IR Blaster Signal
NC
IR Signal
Power 5 V
Grounding
IR Extender
IR Blaster
8
6.7 RS-232 and Telnet Commands
Command
Description
A1~A8
Switch Output A to 1~8
B1~B8
Switch Output B to 1~8
C1~C8
Switch Output C to 1~8
D1~D8
Switch Output D to 1~8
E1~E8
Switch Output E to 1~8
F1~F8
Switch Output F to 1~8
G1~G8
Switch Output G to 1~8
H1~H8
Switch Output H to 1~8
ABCE…1~ABCD…8
Switch Output ABCD… to 1~8 at the
same time
SETIP <IP> <SubNet> <GW>
Setting IP. SubNet. GateWay<Static IP>
RSTIP
IP confi guration was reset to factory
defaults<DHCP>
IPCONFIG
Display the current IP confi g
P0
Power Off
P1
Power On
I1~I8
Switch all the output to 1~8
ST
Display the current matrix state and
fi rmware version
RS
System Reset to H8
EM
Setting EDID MODE. 1-STD 2-TV.
?
Display all available commands
QUIT
Exit (Telnet only)
Note:
1. Any commands will not be executed unless followed by a
carriage return. Commands are case-insensitive.
2. When telnet is idle for 10min it will be off-line automatically.
3. EDID TV will always follow output port 1's EDID regardless on
the output change.
4. EDID setting switching will execute immediately.
