www.phdsolutions.co
Page 14 of 34
10. Web GUI User Guide
The Matrix can be controlled by Web GUI. The operation method is shown as below:
6WHS
Get the current IP Address.
The default IP address is 192.168.1.100. You can get the current Matrix IP address in two ways:
7KHILUVWZD\
You can get the IP address via panel buttons. On the initial OLED display, press
“MENU” button three times to enter the IP interface and check the current IP address.
7KHVHFRQGZD\
You can get the IP address via RS-232 control
.
Send the ASCII command
“ r ipconfig!” through a Serial Command tool, then you’ll get the feedback information as shown
below:
LAN
PC
IP:192.168.61.103 in the above figure is the current Matrix IP address (this IP address is
variable, depending on what the specific machine returns).
)RUWKHGHWDLOVRI56FRQWUROSOHDVHUHIHUWR³56&RQWURO&RPPDQG´
6WHS
Input the current IP address of Matrix into your browser on the PC to enter Web GUI page.
LAN
6WHS
Connect the TCP/IP port of the Matrix to a PC with an UTP cable (as shown in the
following figure), and set the IP address of the PC to be in the same network segment with
the Matrix.
