© Glentronics, Inc. 06/15
1806066
4
Visit our website www.stopflooding.com for more information about the PHCC
Pro Series AC pumps and battery backup sump pump products.
Maintenance Check List
Maintenance should be performed 1-2 times per year.
1. Remove all debris from the the pump strainer and bottom of
the pit.
2. Remove all debris floating in the water.
3. Remove all debris from the float switch cage.
4. Fill the pit with water. Make sure pump turns on at the
intended level.
5. While the pump is running, make sure pump is evacuating water
at a good pace.
6. While the pump is running, make sure a stream of water is
escaping from the air bleed hole. If not, clear the hole of any
deposits or debris.
7. Unplug the control box from the wall. Make sure the “AC power
is out” light and alarm sound (DFC2).
Backup Installation
When the power goes out, the PHCC Pro
Series AC sump pumps will not operate.
For protection during a power outage, a
PHCC Pro Series battery backup system
can be installed. There are three systems
with matching batteries that will provide
protection. The illustration at right is an
example of a typical battery backup
installation.