Phcbi MDF-U5412, Руководство по эксплуатации

Страница: 11 / 32

9
FREEZER COMPONENTS
1. Outer door: To open the door, grip the handle. When closing, lock the door latch completely.
2. Handle: Always grip the handle to open the outer door.
3. Lock:
Turn counterclockwise to 180
o
with a key and the outer door is securely locked.
4. Defrost water vessel & storage container:
The defrost water vessel & storage container can be
used to collect the defrosted water when defrosting.
Note: Do not pull the storage container excessively. The storage container may fall down.
5. Space for temperature recorder:
A temperature recorder (optional component) can be attached here.
See page 24 “Temperature recorder”.
6. Leveling foot:
These are screw bolts used to install and fix the unit. Adjust the height of the leveling
feet by turning the screw bolts until 2 front casters are away from the floor. See page 12
“INSTALLATION”.
7. Caster:
4 casters are provided to facilitate moving of the cabinet. For the installation, adjust the
leveling feet so that the front 2 casters cannot contact with the floor.
8. Door latch:
To lock the outer door, turn this latch downward. A padlock is also available.
9. Storage container: Made of styrol resin. Be careful not to damage the storage container by a
scraper at the time of defrosting.
Note: Do not pull the storage container excessively. The storage container may fall down.
10. Control panel:
To display the temperature setting and running condition. See page 10 for details.
11. Remote alarm terminal:
Used to notify an alarm condition of the unit to remote location. See page
18 for details.
12. Battery switch: Switch for battery used for power failure alarm. Always keep “ON”. Turn the
switch “OFF” when the unit is in no use for a long period (more than 1 month).
13. Fixture (on back side): 2 fixtures are provided as spacers between the cabinet and wall and also
serve as hooks to fix the unit. See page 12 “INSTALLATION”.
14. Power switch:
This is for turning ON/OFF the power to the unit. This switch also activates as an
over-current breaker (15 A).
15. Access port:
This is used for leading a cable and sensor of a measuring equipment.
Note:
The outer door does not open quickly because the inside of the chamber becomes negative
pressure after the outer door is closed.