a、Attach Front support(3) to Front base(4) using Hex bolt M8x20(29) and Bend washer
8(23),
then using Hex bolt M8x16(28) and Washer 8(24) .
b、Attach Leg holder(8) to Front support(3) using Plastic nut(17), then slid Foam roller(13) to Leg holder(8).
c、Insert Long tube(9) to Front support(3), then slid Foam roller(13) and Handle foam(14).
Assembly Instructions
14
13
9
13
14
13
8
17
13
29
23
23
29
24 28
3
4
a.
b.
c.
Step 1
UNPACK THE CARTON AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART WITH THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-FITTED TO LARGER COMPONENTS.
IMPORTANT
ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST,
ONLY TIGHTEN AFTER COMPLETING ALL ASSEMBLY STEPS.
IMPORTANT
4
