FC-1T-1VAC
1 / 4
14741000
FC-1T-1VAC user manual
The FC-1T-1VAC automatically controls ventilation fans according to temperature. When the temperature is at the
set point, the control operates the fans at the idle speed setting. When the temperature exceeds the set point, it
increases the speed of the fans. The FC-1T-1VAC has two modes of operation:
Automatic shut-off mode:
When the temperature drops below the set point, the control shuts off the fans
Idle mode:
When the temperature drops below the set point, the control operates the fans at idle speed.
Features
One variable speed output
Automatic shut-off and idle modes
Fixed 2°F off setback for shut-off mode
Adjustable idle speed for idle mode
Adjustable temperature set point
Fixed 6°F temperature differential
Overload protection fuse
One-foot temperature sensor (extendable)
Rugged, NEMA 4X enclosure (corrosion
resistant, water resistant, and fire retardant)
CSA approval
Two-year limited warranty
Installation
Switch OFF the power at the source before connecting the incoming power wires.
DO NOT switch on the power until you have finished all wiring and verified all equipment is
properly connected and free of obstructions.
Electrical ratings
Input
120/230 VAC, 50/60 Hz
Variable stage
10 A at 120/230 VAC, general-purpose (resistive)
7 FLA at 120/230 VAC, PSC motor
1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor
Variable stage fuse
15 A, 250 VAC ABC-type ceramic
Fill in the table below to help configure your control and verify that you do not exceed the electrical ratings.
Fans
A) Maximum current draw per fan
B) Number of fans
Total current draw = A × B
Make
Model
Voltage rating
Power factor
