iX Controller MK 5 Installation and Operation Guide
4. Connecting Cables and Peripherals
Page 16 of 36
4.6
Keyboard and Mouse
To connect a keyboard and mouse to the iX Controller MK 5:
1.
Using a 2.5 mm hex key, remove both screws securing the USB 3.0 cable bracket front plate to the cable
bracket bottom plate.
2.
Remove the cable bracket front plate, the screws and washers and set them aside.
3.
Connect the keyboard and mouse cables to the USB ports.
4.
Use a 2.5 mm hex key to reattach the cable bracket front plate to the cable bracket bottom plate using
the screws and washers you set aside in Step 2. The front plate should secure the cable hoods.
Note
If the length of the cable hoods prevent you from securing the cable bracket front plate to the cable
bracket bottom plate, you can increase the distance between the front plate and the iX Controller MK 5
as follows:
1.
Gently place the iX Controller MK 5 on its upper grilled plate.
