PhaseOne FlexAdaptor, Начало работы

Страница: 4 / 27

FlexAdaptor Getting Started
2
1 Introduction
Why chose a FlexAdaptor
1. It is extremely easy to use and it provides you with the
opportunity of creating panoramic images on a 4" x 5" view
camera.
The FlexAdaptor from Phase One is a sliding adaptor that
allows you to capture one, two, or three overlapping images.
The individual shots may then be stitched in order to create
one high-resolution panoramic image.
2. It offers a unique possibility of creating very large images
With the Phase One FlexAdaptor and build in stitching large
files can easily be made. This allows for larger prints and
more detail in the images.
3. It lets you take advantage of the view cameras movements
even in one-shot mode.
The FlexAdaptor does not need to be reomoved in order to
work in one-shot mode. Just select one-shot mode and shoot
like you would with your Phase One single-shot camera back.
The focusing screen consists of masked areas that indicate
the available image areas for one-, two-, or three-shot mode.
4. Larger angle of view.
By using the FlexAdaptor the effective angle of view of the
camera is expanded by moving the camera sensor on the film-
plane. This gives you a larger angle of view useful for
architecture and interior shots and eliminates the need for
expensive wide-angle view camera lenses.