Phasemation EA-550, Руководство пользователя

Страница: 8 / 12

8
7) INPUT 1,2,3 (RCA) Terminals
Use when the phono cable to be connected is an RCA type connector
8) INPUT 1,2 (XLR) Terminals
Use when the phono cable to be connected is a balanced (XLR) type
connector
9) GND Terminal
Connect the earth cable of the analogue disc player to the GND terminal
(see p.9 for the wiring)
10) OUTPUT 1,2 (RCA) Terminals
This is an equalizer output (RCA) terminal of an unbalance. This connects to the line
level’s RCA input terminal (150-250mV) of a pre-amplifier AUX terminal or so forth.
11) AC IN
The power input terminal connects to the power outlet with the attached AC power cable.
Do not connect to a phono input terminal of a pre-amplifier having a phono amplifier
inside. It will go to maximum input and sounds will distort.
- For a balance connection of the XLR terminal, an applicable phono cable is necessary.
- For the XLR terminals, no.1 is GND, no.2 is HOT, and no.3 is COLD.
Rear Panel (Right) Rear Panel (Left)
Caution
Caution
- For INPUT1,2, do not connect the RCA terminal and XLR terminal at the same time.
- Do not insert a short pin to the RCA terminal when using the XLR terminal.
- The XLR terminal is only for an MC cartridge. If a balanced (XLR) output of an MC
stepup transformer is connected, it may malfunction.
Caution
PUSH
PUSH
INPUT R
CAUTION !
RISK OF ELECTRIC SHOCK
DO NOT OPEN
KYODO DENSHI ENG. CO.,LTD.
MADE IN JAPAN
50/60Hz 10W
MODEL EA-550
OUTPUT
AC IN
SER. NO.
GND
3
E
S P
2
1
1 2
3
2 1
3
2
1
PUSH
PUSH
INPUT L
CAUTION !
RISK OF ELECTRIC SHOCK
DO NOT OPEN
KYODO DENSHI ENG. CO.,LTD.
MADE IN JAPAN
50/60Hz 10W
MODEL EA-550
OUTPUT
AC IN
SER. NO.
GND
3
E
S P
2
1
2 1
3
2 1
3
2
1