(1) Phono Input Terminal
There are the RCA terminal (unbalanced) and the XLR terminal (balanced) and if they
are connected at the same time, it will be the cause of noises and lossing the sound
quality.
Connect each signal line from your analog disc player to L and R.
* A supported phono cable is needed for a balanced connection of an XLR terminal.
* For the XLR terimal, no.1 is GND, no.2 is HOT, and no.3 is COLD
(2) Phono Output Terminal
Connect to the MM input terminal of the phono amplifier EA-2000EQ
Names and Functions
GND
INPUT
OUTPUT
MODEL EA-2000T
GND
INPUT
OUTPUT
MODEL EA-2000T
EA-2000T MC Step-Up Transformer
Front Panel
*The left and right of the front panel are in common
Rear Panel (Right)
Rear Panel (Left)
Do not apply testers to the input/output terminals. The transformer’s
performance will deteriorate.
(3) GND Terminal
Connect either the L or R of the earth line coming from the analog disc player to the
GND terminal. Follow the connections diagram for wiring the GND connection cable
(from accessories).
Do not connect the RCA and XLR terminals at the same time to the input.
This unit is designed for a balanced connection due to a 2-core shield line.
Therefore when doing an unbalanced connection due to a 1-core shield line,
it is susceptible to noise effects. Caution is needed especially for high
impedance cartridges.
Caution
6
(2)
(3)
(1)
.
.
.
