7
[Figure 8]
TCE1.5
RIGHT
TCE1.5
LEFT
FRONT
CENTER
FRONT
CENTER
A/V RECEIVER
CENTER
RF
LF
-+
-+
-+
CONNECT CENTER CHANNEL SPEAKER LEADS
IN PARALLEL AT AMPLIFIER
HOOK UP DIAGRAM FOR THE TCE1.5 SPEAKER
RR
-+
LR
-+
TSF1.0
SURROUND
RIGHT
SURROUND
TSF1.0
SURROUND
LEFT
SURROUND
STEP 4 – FINAL WALL MOUNTING PROCEDURE
Locate the two holes on the back of the speaker that have the threaded
brass inserts and install the two brass Mounting Pins in these holes
(Figure
7)
. Your TEATRO
®
speakers are now ready to be mounted to the wall.
Gently slide the Mounting Pins into the vertical mounting slots on the
Mounting Brackets. If necessary, the Leveling Screws may be inserted
in the bottom of the Mounting Bracket and used to adjust the height.
Tightening the screw will raise the speaker and loosening it will lower it.
NOTE:
The PHASE TECHNOLOGY grille logo is a separate item with the
TFS1.0 speaker and may be placed on the speaker grille in the appropriate
position depending on whether the speaker is installed vertical or horizontal.
Simply peel the backing off of the logo and place on the grille in the desired
location.
[Figure 7]
[CARING FOR YOUR PHASE TECHNOLOGY SPEAKER]
All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We recommend using a
lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils, oil derivatives,
or solvents. Enclosures finished in vinyl laminates may be cleaned with a damp cloth as necessary.
[MAINTENANCE AND SERVICE]
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if connected and used
as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase Technology dealer. Your dealer has the
necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original performance specifications.
[TROUBLESHOOTING]
NO SOUND
1.
Verify that all components are plugged in and turned on.
2.
Check all speaker wires and cables for loose connections.
3.
Check to see if you have selected the proper source on your amplifier.
VOICES DO NOT APPEAR TO COME FROM BETWEEN THE SPEAKERS / BASS RESPONSE IS WEAK
1.
Verify that all speaker connections from the amplifier to the speakers are running PLUS+ to PLUS+ and MINUS- to MINUS-.
2.
Check to see if there are any furnishings or plants that may be blocking the output of a speaker.
Make sure nothing is directly in front of that speaker.
SOUND, BUT NO BASS (MOST LIKELY IN SYSTEMS WITH A SUBWOOFER)
1.
Verify that the subwoofer is plugged into an AC outlet and power is turned on.
2.
Check that the speaker wire / cable going from the amplifier/receiver to the subwoofer is securely fastened.
3.
Check the volume control of the subwoofer.
4.
Refer to your amplifier/receiver manual to make sure you have adjusted its bass output properly.
STEP 5
Since the TCE1.5 speaker performs as the front three speakers in a home
theater system they are to be used and set up as you would any normal 5.1
to 7.2 surround sound system for balance and level adjustments. For the
best performance, the amplifier should be set to the small speaker mode
for the left/center/right front speakers. The subwoofer setting should be set
between 80 - 100 Hz. We recommended the use of our Phase Technology
subwoofers and the TFS1.0 as the surround speakers to complement the
sound and performance of the TCE1.5 or the TSB3.0 sound bar speakers.
Содержание Teatro
Страница 1: ...OWNER S MANUAL INSTALL GUIDE...
