background image

Adjust the rubber stand-off bumpers by turning them either in or out to adjust the tilt of the speaker until the front is vertical. Lock the adjusting 
screws in place by tightening the locking nuts against the rear of the cabinet. Please be certain that the nylon washer is between the nut and 
the cabinet to protect the cabinet finish. 

 

Step 6  

Since the TEATRO sound bar speakers form 
the front 3 speakers in a home theater 
system for flat panel displays they are to be 
used and set up as you would any normal 5.1 
to 7.2 surround sound system for balance 
and level adjustments. The amplifier should 
be set to the small speaker mode for the 
left/center/right front speakers for the best 
performance. The subwoofer setting should 
be set to 80 Hz. We recommend the use of 
our Phase Technology subwoofers and 
surround speakers for complimenting your 
installation. 
 

 

 

Step 7 

The 

EVT™ 

switch which is located on the 

front of the speaker under the grille activates 
Phase Technology’s 

Enhanced Voice 

Technology

 feature.

 

This feature is designed to improve the clarity of the voice or dialogue from the center channel speakers in the system. 

Flipping the switch to the “UP position engages the circuit and “DOWN” turns it off. 
 

MOUNTING TO FLAT PANEL MOUNTING BRACKETS 

There are additional mounting inserts on the rear of the speaker cabinet to facilitate attaching the sound bar 
speakers to on wall flat panel mounts, see note figure 1. There are 6 threaded inserts provided that coincide with 
the requirements of most manufactures mounts. Please check with your mount manufacture for applications and 
compatibility. 
 

 

TEATRO SOUND BAR  SPEAKER SPECIFICATIONS 

 

 

MODEL 

 

T-V3.0 T-PC3.0 

 

TWEETER 

1” SOFT DOME x 3 

1” SOFT DOME x 3 

 

MIDRANGE 

----- 

1.5” SOFT DOME x 3 

 

WOOFER 

5.25” VDT x 3 

5.25” RPF x 3 

 

FREQUENCY 

55Hz-22kHz 52hz-22kHz 

 

SENSITIVITY 

91 dB 

89 dB 

 

IMPEDANCE 

4 OHMS 

4 OHMS 

 

MAXIMUM POWER 

120 WATTS 

150 WATTS 

 

DIMENSIONS 

40” (W) x 7” (H) x 4 ½” (D) (5 ½” with bracket) 

 

FINISH 

SATIN BLACK 

GLOSS BLACK 

 

WEIGHT 

25 LBS 

30 LBS 

218-2082 

FIGURE 3 

LEVELING ADJUSTMENT 

SCREW IN WALL BRACKET 

LOCKING SCREWS IN 
SPEAKER BRACKET 

WALL MOUNTING BRACKET 

SPEAKER MOUNTING BRACKET 

Отзывы: