The P3-35 is a 2 or 3 channel amplifier with Dolby Digital® decoding. It is designed to be used with either a Bluetooth, analog,
or digital input from a TV or other audio source. With a digital input, it automatically senses Dolby Digital and PCM and switches
modes. The P3-35 takes the input signal from an audio source, decodes it and outputs either a 2 or 3 channel amplified signal
to a sound bar or set of speakers. When set in the 2 channel mode, it will take a stereo or multi-channel signal and mix it down
to 2 output channels (left and right). When set in the 3 channel mode, it will take a stereo or multi-channel signal and mix it into
3 output channels (left, right and center). In either mode there is a sub out option.
BOX CONTENTS
1- Amplifier in Weatherproof Box
1- Bluetooth® antenna
1- 32 V, 3.75 A power supply
1- Six-pin Euroblock connectors
1- Three-pin Euroblock connectors
1- Mini Screw Driver
TABLE OF CONTENTS
Page 1
Important Safety Information
Speaker Connections
Page 2
Connecting a Subwoofer
Connecting your Wired Audio Source
RS232 Control
Page 3
Pairing with a Bluetooth Device
Equalizer Settings
Weatherproof Box Installation Instructions
Page 4
Weatherproof Box Installation Instructions
(Continued)
Standby and Sleep Settings
Setting the Operation Mode
Page 5
LED Mode Guide
Install Instructions For:
P3-35 Outdoor
Warning
Phase Technology products must be installed by a professional audio installer/contractor . For safety and for
optimum audio performance, installer must follow all directions issued by Phase Technology .
