Operating Instructions & Parts Manual
Page 22
Upper/Lower
Limit
Setting:
The 9500 series indicators have an Upper/Lower limit setting with alarm. Once set, the
indicator will alert you to a hardness value that is outside of your preset limits.
See instructions for limit setting below:
1) Press the Menu/Enter button. Make sure Measurement is highlighted. Press the
Menu/Enter button again and scroll down to Limit Alarm. Limit Alarm should be
highlighted. Press the Menu/Enter button to open up the choices. Use the Arrow buttons to
scroll through the choices and highlight OFF if you don’t want this feature.
Highlight Enter and press the Menu/Enter button to set your limits.
Use the Up and Down arrows to change the values to match your desired limit settings.
Once obtained, press the Menu/Enter button to save. Scroll up to ON and highlight that.
Press the Menu/Enter button to save and return to the main test screen.
Memory
Functions:
The 9500 series indicators can store up to 999 hardness values and can be viewed at your
convenience by accessing the memory. Access the memory setting by following below:
1) Press the Menu/Enter button. Scroll down to Memory and highlight it. Press the
Menu/Enter button again and you will see the three choices available for this indicator.
Browse
All
: This allows you to view all of the values stored in the memory.
Browse
Select:
This allows you to select the values in memory by a particular hardness
scale. In other words, if you only want to see the Rockwell C scale values, you would select
HRC in this menu.
Print:
This is not an option on the 9500 series indicators.
System
Settings:
1)
Key
Tone:
This feature can be turned on or off in the menu.
2)
Backlight:
This feature can be turned on or off in the menu.
3)
Language:
This indicator can be set to English or Chinese in the menu.
4)
Date/Time
Setting:
You can set the date and time in the menu.
