Operating Instructions & Parts Manual
Page 20
Setting
Parameters:
1)
Hardness
Scale
: Press the Menu/Enter button. Make sure Measurement is highlighted.
Press the Menu/Enter button again and SCALE should be highlighted. Press the
Menu/Enter button to open up the list of hardness scales. Use the Arrow buttons to scroll
through the choices and highlight the scale that you want the indicator to read in.
If you are not sure about your selection, please reference the chart below:
Auto
Locking:
This feature will automatically hold the hardness value the moment the reading is stable.
On softer metals the penetrator may continue to indent the material which may affect the
reading. The lock feature will prevent the value from changing once stabilized even though
the penetrator may still be moving.
Auto
Locking
con’t:
If you don’t want this feature then turn it off by changing in the menu. Follow instructions
below:
1) Press the Menu/Enter button. Make sure Measurement is highlighted. Press the
Menu/Enter button again and scroll down to Auto Locking. Auto‐Locking should be
highlighted. Press the Menu/Enter button to open up the choices. Use the Arrow buttons to
scroll through the choices and highlight OFF if you don’t want to use this feature.
