phase II+ 220-006, Инструкция по эксплуатации и каталог запасных частей

Страница: 2 / 13

Operating Instructions & Parts Manual
Horizontal Rotary Tables
Dividing Plates
Pg.
2
Operating Instructions & Parts Manuals
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal
injury and or property damage! Retain instructions for future reference.
Description
The Phase II horizontal rotary tables are used for
indexing, circular cutting, angle setting, boring and
spot facing operations. The meehanite cast iron
table is precision machined and is provided with a
Morse Taper center hole. The table is graduated
with a 360

scale. A micro collar graduated to one
minute with a ten second accuracy vernier scale is
provided. Rotary table features include lock‐down
handles and crank disengagement mechanism.
Worm gear and center hole taper are hardened
and ground. The dividing plates accessory allows
the operator to accurately divide the 360

rotation
of the clamping surface into divisions of 2 through
66, and all divisibles of 2, 3 and 5 from 67‐132.
Unpacking
Check for shipping damage. If damage has occurred, a
claim must be filed with carrier immediately. Check for
completeness. Immediately report missing parts to
dealer. Carefully remove table from crate.
Important: The tool has been coated with protective
coating. In order to ensure proper fit and operation the
coating must be removed, remove coating with mild
solvents such as mineral spirits and a soft cloth.
Nonflammable solvents are recommended. After
cleaning, cover all exposed surfaces with a light coating
of oil. Be sure to lubricate table as described in
"Maintenance"
Caution: Never use highly volatile solvents.
Avoid getting cleaning solution on paint, as it
may tend to deteriorate these finishes. Use
soap and water on painted components.
Specifications
Dividing Plates Accessory
Possible divisions of
One rotation: ................... 2 thru 66, and all
............................................... divisibles of 2, 3, and 5
............................................... from 67‐132
Accuracy Maximum T.I.P.
Flatness of clamping surface ............................. 0.0006”
Parallelism of clamping
Surface to base ....................................................... 0.0008”
Squarness of clamping surface
to angle face ............................................................ 0.0004"
Squareness of clamping surface
to center slot ........................................................... 0.0008"
Concentricity of center bore.............................. 0.0008"
Maximum spacing error:
6” & 8” ..................................... 1 minute, 20 seconds
10”, 12” & 16” ......................... 45 seconds
General Safety Information
1. Read and follow all operating instruction before operating
rotary table.
2. Understand and obey all safety instructions supplied with mill
or other machines on which the rotary table is used.
3. Always secure rotary table to work surface or other machine.
4. Always secure workpiece to rotary table clamping surface if
used.
5. Always secure face plate to rotary table clamping surface if
used.
6. Always secure rotary table clamping surface with lock‐down
handles when possible.
7. Maintain and lubricate tool properly.
Installation
1. Mount rotary table securely to machine work surface.
2. Use slots provided on table and be sure that table is
rigidly and safely secured.
3. Table can only be mounted horizontally with slots
provided.
Lubrication
Keep rotary table clean of dirt or chips.
Before putting into use, fill base cavity with
oil using the oil zerts on base, table and oil
plug(Ref No. 11). Unscrew oil Plug prior to
lubrication. Before every shift of operation fill
adequate oil through oil zerts and oil plug.
LUBRICATE WITH LIGHT DUTY
HYDRAULIC FLUID OR SPINDLE OIL. Table
should be filled with oil until it it visible in
the sight glass, do not overfill.
Frequently check oil level using sightglass
(Ref.No.8) Do not use rotary table without
adequate oil.