phase 5 CYBERSTORM MKIII, Руководство пользователя

Страница: 33 / 57

SYSTEM REQUIREMENTS
Minimum Configuration:
c Amiga 3000 (T) /Amiga 4000 (T) or computer with compatible Processor slot
c 8 MByte on the CYBERSTORM MKIII installed Fast RAM
c Harddisk
c Kickstart ROM Version 3.x
Recommended Configuration:
c Amiga 3000 (T) /Amiga 4000 (T) or computer with compatible Processor slot
c 16 MByte or more on the CYBERSTORM MKIII installed Fast RAM
c Harddisk, CD ROM drive, Kickstart 3.1
c „CyberVision PPC“ graphics board (available 4th quarter 1997)
READ BEFORE INSTALLING THE CYBERSTORM MKIII
Before you begin with the installation of the CYBERSTORM MKIII, you should first consider the
following items:
1. To function correctly, the CYBERSTORM MKIII needs special 68060 - specific software. This
software has to be installed before the assembly of the CYBERSTORM MKIII. See also para-
graph „Software installation“.
2. If you want to install in the CYBERSTORM MKIII into an AMIGA 3000/3000(T), please first
read the paragraph "Jumper configurations in the AMIGA 3000/3000(T)" so that you can carry
out the correspondingly required jumper configurations on the mother board of the AMIGA
3000/3000(T).
3. In order to operate the CYBERSTORM MKIII a Kickstart-ROM Version 3.x must be
installed.
4. To expand your CYBERSTORM MKIII with the for the operation of the board necessary
storage modules (SIMMs), please read chapter 2 first, as it is easier to install the SIMMs befo-
re installing the CYBERSTORM MKIII in the computer.
31