PHAROS MARINE PHALCON 2000, Руководство по установке

Страница: 13 / 17

Phalcon 2000 Installation Guide
Ref: HB-09300/01 Issue 1
5
Although the Phalcon 2000 power consumption is very low, the power cables installed must have a
current capacity of 3 Amps, and be suitable for external exposure.
Remove the protective cover from the connector body on the unit.
Connect the cable connector onto the Phalcon 2000 socket and tighten the retaining ring. Ensure
the cable is held firmly in place.
WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY THE
MANUFACTURE'S HEALTH AND SAFETY INSTRUCTIONS.
Apply a waterproof grease or sealant to the connectors.
A two meter cable assembly is supplied to connect the Phalcon 2000 to the Junction Box and
power supply. You will need to manufacture the interconnection cables to match your system.
Refer to Figure 4.
Note: The power supply inputs are floating relative to ground.