Phantos Sensation, Руководство пользователя

Страница: 11 / 12

careless or abnormal use;
 Keep the lamp work under the required voltage , ensure the use of
voltage is in the voltage range of technical parameters ;

For using the power line input and output connector, the maximum of
lamps is 12 under the voltage 220V; the maximum of lamps is 6 under the
voltage 110V. The number of lamps for using the DMX512 input and output
signal line is not limited ;

Do not install the lights near the heat source to avoid the rising of
lamp temperature and affecting the normal use of lamps and lanterns,
even damaging the lamp;
 Check before use the connection of 110V~220V AC power to ensure that
the connection between power supply and switch is good. Please use
qualified power plug and outlet ;

During move and installation, make sure the device not crashed with
metal parts and other tough materials .
2. Warning
：
 Unqualified person involved with installation, operation and
maintenance of this lamp is prohibited

Don't insert other things into the inside of the lamp, so as to avoid
anything reach ing the part with high voltage, then lead to partial
short circuit , or else a fire or electric shock may occur , and then
affect the normal use of the product.

Please keep the bulb clean, do not direct ly touch the bulb glass by
hand.

Do not watch the light source straightly for avoid the damage to the
eyes.
9
、
Notes for installation and operation
1. Installation
 （
1)Before the location and installation of the lamp, ensure the stability
of its installation point , which can hold at least 10 times the weight of
the lamp.

(2) Installation method: use one piece of professional clamp , M13 bolts,
and our own retaining screw to install; pull the safety chain( distribution
or owned) through the yoke or other hanging objects and tighten the
fixation screw. Check if there is any wear of the safety chain and loosen
of the clamp periodically . In addition, cut off the power supply when
remove the lamps to ensure safety . Take the safety rope first , then remove
the hanging, and pay attention to the safety of pedestrians below.
2. Notes:

（
1
）
Do not frequently switch the lamp, so as not to affect the service
life of the bulb. Try to avoid the lamp to run for long periods of time.