5
LAMP INSTALLATION,
continued
6. After sliding the socket ends closed, be certain that there is no gap between the
edge of the sliding section and the part it meets at the end of the slide path. Once
lamp is
positioned correctly, slide the lamp holder inward toward the center of the bulb to secure
and lock the lamp in place as shown in
PHOTOS G & H
.
PHOTO G
PHOTO H
PLEASE NOTE:
Do not force the lampholders closed. This could cause damage to both
the lamp and lamp holders. Do not handle lamp with barehands. Always wear surgical
or cloth gloves whe never possible when handling lamp to minimize fingerprints and oils
left on the lamp. If the lamp needs cleaning after installation, use a soft dry cotton cloth
to wipe off fingerprints/skin oils.
HANGING YOUR FIXTURE
IMPORTANT: Before you begin, make sure your light system is unplugged.
IN A GREENHOUSE SETTING
1. Simply place the hook-like curved end (not included) truss hanger through the eye
bolt in the top rear part of the ballast housing with wire end facing inward toward
reflector.
2. Then place the curved end of the other truss hanger through the hole in the nose of the
armature with wire end facing in ward toward reflector and ballast. Hang the truss
hangers and system on the truss in the desired location.
Continued >
