GLACIER C350ap
MANUAL V1.0
STEP 1. REMOVE THE ORIGINAL PLASTIC CLAMPS
PH-C350ap_BK01
INSTALLATION for socket AM4
PACKAGE CONTENTS
C350ap Block
Socket Screws for:
- AM4
Acetal Standoff
Thermal Compound
(PH-NDC_01)
4x
4x
STEP 2. INSTALLING THE SOCKET SCREWS
Place and tighten the four (4) included socket screws by hand
on the AM4 socket.
Use a Philips-head screwdriver to remove the four (4) screws
(in red). Remove the plastic clamps from the motherboard and
make sure the original AMD backplate stays in place.
DISCLAIMER
- This product is intended for advanced users.
Please consult with a qualified technician for installation. Phanteks
assumes no liability for any damages occurring as a result of using
Phanteks cooling products.
WARNING
- Power down the system before installation.
- Do not disassemble the waterblock. Warranty will be voided.
- Perform a leak test before turning on the system.
- Check our website for the latest installation guide.
STEP 3. INSTALLING THE ACETAL STANDOFFS
Place the four (4) included Acetal Standoffs onto the
socket screws.
