25
24
VIRTUALLY EXTEND THE TOOL
NOTE
• Tool extension can be performed to show the tool path during the simulation.
• To virtually extend the tool in the 3-D windowpne, click on the EX TEND TOOL button and move the slid-
er to variable extend the virtual tool extension, shown as a red line in the 3-D windowpane (Fig. 11).
ADJUST THE OPACITY VALUE OF AN ANATOMICAL STRUCTURE
The opacity of a specific anatomical structure may be changed to provide better visualization
within and behind the Patient.
1. Click on the drop-down list and select the desired anatomical structure. (Fig.12 ).
2 . Move the slider to change the opacity of the selected structure or click on the square but-
ton next to the selected structure to change opacity in steps „off“ (red), 25 % (orange), 75 %
(yellow), „on“ (green).
(Fig. 11)
(Fig. 12)
