If you have questions or missing parts, please contact our customer care at 1-888-745-4837
INSTALLATION OVERVIEW:
MODE SELECTION:
Mode I (Motion Sensor Mode):
Enter into Mode I by pressing the
button once. The lights will stay on
for 3 seconds, indicating this mode.
When motion is detected, the lights
will illuminate at full brightness for
approximately 20 seconds. The lights
won’t turn on if it is daytime.
Mode II (Dim light/Motion Sensor Mode):
Enter into Mode II by pressing the
button a second time. Under this mode,
the light illuminates automatically at
dusk using a low brightness energy-
saving mode. When motion is detected,
the light illuminates at full brightness for
approximately 20 seconds.
When movement detection ceases, the
light will revert to the low brightness
energy-saving mode.
Mode III (OFF)
Enter into Mode III by pressing the
button a third time. The light will be
turned off.
1. Place the mounting socket to a desired position,
and mark the screw points through the holes. Use
power drill and screw drivers to fasten the socket to
the chosen surface. If mounting on brick or other hard
siding, use a 1/4-in drill bit to pre-drilled holes for screw
anchors.
3. In case you want to take the light off, press the handle below.
Slip the light off by moving it upward.
NOTES:
• Ideal height is 8 Ft. from the ground. At such a height, the fixture will provide a
detection distance of up to 25 feet.
• The motion sensor is the most sensitive as a person or object moves parallel to the
sensor head.
• The motion sensor is the least sensitive if a person or object moves directly at the
sensor head.
• Do not mount the fixture near a heat source like an air conditioner, vent, or furnace
exhaust, or in a direction facing a reflective object or nearby light source.
• The sensor cannot be
placed less than 8 Ft. from
any reflective material. If
the light flashes, the sensor
is too close to such a
material. If this happens,
move the light fixture.
2. Buckle the motion light to the mounting socket securely,
and adjust the solar panel and light heads to your desired
direction.
This product has a two-year warranty from the date of purchase. This
guarantees against failure due to factory defects, whether caused by materials
or workmanship. The warranty is non-transferable and only pertains to the
original purchaser. Proof of purchase is required for any repair or replacement,
so please keep your proof of purchase receipt. This warranty does not cover
normal wear and tear or damage due to misuse. Misuse of this product includes
but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product’s housing.
• Any attempts to update, remodel or fix the unit yourself.
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights
protective covering.
CARE AND MAINTENANCE
• The solar motion light is suggested to be cleaned with a damp cloth regularly.
This will ensure optimal performance and battery charging.
• Never let any abrasive material come into contact with the solar panel.
INSTALLATION INSTRUCTIONS:
USER MANUAL CL-SML3 1500 LUMEN TRIPLE HEAD SOLAR MOTION ACTIVATED SECURITY LIGHT
