PFT SWING II, Руководство по эксплуатации

Страница: 12 / 36

3)76:,1* *%
0RUWDU3XPS 9HUVLRQ
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
:$51,1*
The use of a mortar pressure gauge is absolutely mandatory in accordance with the
accident prevention regulations of the Bauberufsgenossenschaft (German trade
association having liability for industrial safety and insurance).
3)70RUWDU3UHVVXUH*DXJH
Some of its advantages:
•
Accurate regulation of the appropriate mortar consistency
•
Continuous monitoring of the correct conveying pressure
•
Early detection of obstructions or an overload of the pump motor
•
Provides a high degree of operator safety
•
Longevity of the PFT pump components
127(
1. Stator SWING II can be used at operating pressures of up to 20 bar.
2. The possible conveying distance largely depends on the flowability of the mortar.
Heavy, sharp-edged mortars have poor conveying properties. Fluid materials,
filling compounds, paints etc. show good conveying characteristics.
3. When exceeding an operating pressure of 20 bar, it is advisable to use thicker
mortar hoses.
4. To avoid machine malfunctions and excessive wear of the pump motor, pump
shaft and pump, always use original PFT spare parts, such as:
3)75RWRUV
3)76WDWRUV
3)73XPS6KDIWV
3)70RUWDU3RVHV
These parts are compatible with each other and form a structural unit together with
the machine. If you do not adhere to these recommendations, you stand to forfeit
your warranty rights, and a poor mortar quality is to be expected.