FT Silomat E 140
(VAE)
Operating Instructions
05.2008
Knauf PFT GmbH & Co. KG
19
Check the slider width after 2,000 operating hours.
The minimum width of the sliders (20) of 32 mm may not be gone below.
When replacing the sliders, blow the housing out with dry air.
When dismantling, top up the grease in the rolling bearings to replace the
amount used.
Transportation and storage
Make sure to store the pump in a dry place and to avoid condensation
caused by water vapours.
The SILOMAT E 140 may
not
be transported by crane
.
20