HOT WIRE CUTTING TOOL Overview - Operation - Spare parts lists
Using PFT CUTMASTER
29.07.2013
Page 13
4 Using PFT CUTMASTER
4.1 Intended use of PFT CUTMASTERS
The tool is conceptualised and designed exclusively for the
purpose of use specified here.
NOTE!
The PFT CUTMASTER is exclusively for accurate
cutting of heat insulation panels made of foam
polystyrene using a hot wire.
WARNING!
Danger due to improper use!
Any case of use beyond the specified purpose of
use and/ or any other sort of use of the tool can
lead to dangerous situations.
Therefore:
– Use the tool only for the purpose specified.
– Always adhere to the usage directives of the
material manufacturer.
– Strictly follow all instructions in this operating
manual.
Claims of any kind due to damage caused by improper use will not
be entertained.
The operator of the tool is alone responsible for any damage
arising from improper use.
4.2 Intended use of PFT MINICUT
The tool is conceptualised and designed exclusively for the
purpose of use specified here.
NOTE!
PFT MINICUT is designed only for cutting
polystyrene-hard foam, like front insulation panels,
roof insulation panels or basement insulation
panels.
The temperature of the cutting blades is designed
for this material.
