Pfaff select 1520, Инструкция по эксплуатации

Страница: 15 / 82

5
A
B
D
Operate your Pfaff select
Winding the bobbin
from the spool holder
Place the sewing thread on the spool holder
(8). To guarantee free movement of the thread
and to give additional hold to the thread spool,
fi t a spool cap corresponding to the size of the
thread spool
Threading
Place the thread into guide A and pull it through
opening B and to the right under the hook D.
Wind the thread clockwise a few times around
in the bobbin.
Switch on the main switch
Hold the end of the thread fi rmly and press
the foot control. The winding action will stop
automatically as soon as the bobbin is full.
Cut the thread, push the bobbin to the left and
remove it.
Don’t forget:
Turn the handwheel release disk (3) fully back
again. Then turn the handwheel (4) towards
you until it snaps into place.