Pfaff QUILT ARTIST II, Руководство пользователя, Страница: 19 / 42

19
Section 5: Initial Start-up
For your initial Start up you need to run a few test patterns to ensure
everything is setup properly.
1. Go to home and select “Set Quilt Area”. You will
now be prompted to set your quilt area (Please refer to
page 27 to see how this is done).
2. As you will notice, after you set the quilt area, a pat-
tern box appeared on the screen. This is a default box
which is the size of your quilt area; you will need to
adjust this box to fi t your stitch area.
3. Go to home and select “Pattern box”.
4. Select “Adjust Current” to set up your pattern box
( see page 27 under “setting Pattern box”)
5. Move your machine to the center of your quilt
frame.
6. Starting at the center of your quilt frame, move your
machine approx 10” to the front left and touch the (+)
for point 1.
7. Now move the machine 20” to the right and touch
the (+) for point 2. (You will see horizontal red line
drawn on the screen. If there is no line, you are outside
of your extents and need to cancel out and start the pat-
tern box over, ensuring to keep the line inside your quilt
area.)
8. After you have set point 2, move your machine
to the back right, approx 10”, and touch the (+) to set
point 3.
9. Move to the back left approx 20” (if any of your
lines don’t look straight, that is ok) and touch the check
mark.
To run the test patterns follow these steps:
Go to home and select “Set Quilt Area.”
Go to home and select “Pattern Box.”
You will see your pattern box on the screen.