Pfaff powerquilter 1600 Скачать руководство пользователя страница 36

Страница: 36 / 50

powerquilter

™

1600 Quilti ng Machine User’s Guide

| 33

Diagnosti cs Tests

Motor Sensor Test

The Motor Sensor Test helps you determine if there may

be a problem with the powerquilter™ 1600 motor. Slowly

rotati ng the hand wheel should result in an audible

beep. If you get a constant solid beep or no beep at all,

this indicates a failed test and the machine should be

inspected by a quali fied PFAFF® repair technician.

Press the

HOME

butt on to return to the Main menu

screen or the

Tools

butt on to return to the Diagnosti cs

menu screen.

Speed Sensor Test

The Speed Sensor test can helps determine if there is

a problem with the powerquilter™ 1600 speed sensor.

Before performing this test, remove the bobbin case and

the top thread. Press the foot pedal so that the machine

will begin slowly running. The white box will show a

number that should stabilize at 100 if the sensor is

functi oning properly. Release the foot pedal to stop the

ma chine.

Press the

Home

butt on to return to the Main menu

screen or the

Tools

butt on to return to the Diagnosti cs

menu screen.

Lighti ng

The brightness porti on of this screen has two butt ons and

a sliding control. The LED Light Ring and light bar can be

turned on or off with the switch butt on associated with the

LED locati on. Use the slide bar to adjust the brightness of

each light.

Calculator Screen

A basic six-functi on calculator is provided. The functi ons

provided are additi on, subtracti on, multi plicati on, division,

square root, and percentage. Use the back space on the top

right to delete a digit mistakenly entered.

Diagnosti cs Screen

Six diff erent diagnosti cs tests can be performed on the

machine. These functi ons test the motor control operati on,

the foot pedal, and the internal positi on sensors.
• (A) Motor Sensor Test

• (B) Speed Sensor Test

• (C) Moti on Sensor Test (Sti tch Regulati on)

• (D) Needle Sensor Test

• (E) Tension Calibrati on

• (F) Foot Pedal Test
Press the

Home

butt on to return to the Main menu

screen or the

Tools

butt on to return to the Diagnosti cs

screen opti on.

Содержание powerquilter 1600


















































Результаты поиска

Содержание powerquilter 1600

Отзывы:

Похожие инструкции для powerquilter 1600

Бренды по названию

Популярные бренды

Pfaff powerquilter 1600, Руководство пользователя

Результаты поиска

Содержание powerquilter 1600

Отзывы:

Похожие инструкции для powerquilter 1600

Бренды по названию

Популярные бренды