Pfaff performance 5.0, Руководство пользователя, Страница: 53 / 84

4:17
Sewing mode
Sew on a button
To sew on a button, remove the presser foot and
select the sew on button stitch. The feed dogs will
automatically be lowered.
Place the button under the presser foot holder. Use
the mirror side to side icon to make sure the holes in
the button are aligned with the swing of the needle
and the width is appropriate for the actual button.
If needed change the stitch width to align with the
holes in the button with the stitch width control.
If needed, increase or decrease the number of
stitches that will fasten the button on the fabric,
using the button stitch repetition icons. Start to sew.
The machine will sew the program for you.
Note: Use the multi-purpose tool to create a thread shank
for your button. You can also use a sew on button foot,
available as an optional accessory at your local authorized
PFAFF ® dealer.
'DUQLQJ
Darning a small hole or a tear before it becomes
larger can save a garment. Choose a lightweight
thread in a color as close to your garment as
possible.
1. Place fabric or stabilizer in position under the
hole or tear in your garment.
2. Select a darning stitch.
3. Start sewing beside, above the hole and then
over it.
4. Once you have sewn across the hole, press the
reverse button to set the length of the stitch.
Your sewing machine will automatically
complete the stitch.
5. By default, the machine will be set to repeat the
same size darning square; just continue sewing.
The repeat icon will be highlighted, indicating
that repeat is activated. Touch the repeat icon to
deactivate repeat.
Stitch repetition
Stitch width
Mirror
side to side