Pfaff perfomance 2058, Руководство пользователя, Страница: 44 / 98

3:10
Twin needle safety. With this function, you reduce the width of
your stitch in order to use a twin needle. To set the correct needle
spacing of your twin needle, long touch the icon until a window
appears. Set the needle spacing with the function fi eld buttons (5)
and con fi rm by touching the window. The function remains active
even after a stitch has been changed, including after the machine
has been switched off and on. Touch the icon again to deactivate
the function.
Programmable seam length function for straight stitch. Specify a
particular seam length for joining together several pieces of fabric
of equal length. Tie-off is automatically activated. Press the reverse
button (10) when you reach your desired length, the machine ties
off and stops. All subsequent seams are now automatically sewn in
your speci fi ed length until you deactivate the function by touching
the icon again.
Symmetrical tapering, increase. For zigzag stitch no. 3. The width
of the zigzag stitch starts with 0mm and becomes wider until it
reaches the selected maximum stitch width.
Symmetrical tapering, reduce. For zigzag stitch no. 3. The width
of the zigzag stitch starts at the selected maximum stitch width and
tapers to 0mm when the reverse button (10) is pressed. It stops with
the needle in the down position.
Asymmetrical tapering, increase. For zigzag stitch no. 33. The
width of the zigzag stitch starts with 0mm and becomes wider until
it reaches the selected maximum stitch width.
Asymmetrical tapering, reduce. For zigzag stitch no. 33. The
width of the zigzag stitch starts at the selected maximum stitch
width and tapers to 0mm when the reverse button (10) is pressed. It
stops with the needle in the down position.
Note: See page 5:4 for further instructions on using the tapering
function
Straight stitch safety. Select this function when using a straight
stitch needle plate and/or a straight stitch presser foot to lock the
center needle position (4.5mm) for all straight stitches to prevent
damage to the needle, presser foot or needle plate. This function
remains active even after a stitch has been changed, including after
the machine has been switched off and on. To sew with a stitch that
is not supported by the straight stitch safety the function must be
deactivated. Touch the icon again to deactivate the function and go
back to normal sewing.
Note: Twin needle and straight stitch safety cannot be used at the
same time.
Balance for buttonholes. Touch the icon and fi ne tune the stitch
balance with the function fi eld buttons (5).