Pfaff hobbylock 2.5 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 32

Pfaff hobbylock 2.5 Скачать руководство пользователя страница 11

11

Threading

General threading information

A color coded diagram is located inside the front cover for quick

reference. Always start threading the upper looper, followed by

the lower looper and then the needles from right to left.
See the table below for recommendations on what needles and

thread to use for different fabric weights.
Tip: Your new machine is threaded to sew a standard overlock. Tie

your own threads to these threads and carefully pull them through the

machine, to easily thread your new overlock machine the fi rst time.

Re-threading if a thread breaks

If the two loopers are not threaded in the correct order they

will not create a stitch. If a looper thread breaks always do the

following:
1. Unthread the needle(s)
2. Unthread the loopers
3. Thread the upper looper
4. Thread the lower looper
5. Thread the needle(s) from right to left
The following pages give you detailed step by step instructions on

threading.

Fabric

Light fabric

(voil, crepe, georgette, etc.)

Medium fabric

(cotton, chino, wool, satin

etc.)

Heavy fabric

(denim, jersey, tweed etc.)

Needles

#12/80

#14/90

#14/90

Thread

Polyester

(spun fi lament)
Twisted thread

#60/2 - #100/3
Twisted thread

#80/3 - #100/3

Twisted thread

#60/2

Twisted thread

#50/2 - #60/2

Note: When using standard thread spools, place the thread

unreeling disc as shown to prevent the thread from getting

caught on the edge of the spool.

«
...
9
10
11
12
13
...
»

Содержание hobbylock 2.5

































Отзывы:

Нет отзывов