Pfaff hobbylock 2.5, Руководство пользователя, Страница: 10 / 32

10
R
N
N
R
N
R
A
B
Preparations
2-thread overlock converter
Engaging
Turn off the main power switch and unplug the machine.
2-thread overlock stitches are sewn using one needle
thread and the lower looper thread. Before sewing, the
2-thread converter must be attached to the upper looper.
The 3-thread stretch overlock stitch is also sewn with the
2-thread overlock converter engaged.
• Open the front cover.
• Raise the white handle on the 2-thread converter to
insert the sharp edge (A) of the converter in the eye (B)
of the upper looper.
Disengaging
Turn off the main power switch and unplug the machine.
• Lower the white handle on the converter and remove
the sharp edge (A) from the eye (B) of the upper looper.
Stitch fi nger lever setting
The stitch fi nger lever should be set to N for all standard
overlock sewing. To sew rolled edge you need to retract
the stitch fi nger by setting the stitch fi nger lever to R.
When moving the stitch fi nger lever, be sure to push the
lever as far as it will go in each direction.