Pfaff creative sensation pro II, Руководство пользователя, Страница: 142 / 166

9:12
Embr
oidery mode - stitch-out
How to embroider with
Inspira
™
Cutwork Needles
1. Hoop you fabric with heavy-weight water
soluable stabilizer.
2. Look in your PFAFF
®
creative sensation
™
pro II Embroidery Collection and follow the
instructions for your embroidery design. Start
embroidering according to stitch-out order.
3. When your Embroidery Collection indicates
it is time for the Cutwork Needle, remove the
needle and top thread.
4. Each
Inspira
™
Cutwork Needle has its own
color. Match the color of the needle with the
color of the needle shown in the Embroidery
Collection. Replace the embroidery needle with
the Inspira
™
Cutwork Needle. (illustration 1)
5. Complete all the needle blocks according to the
Embroidery Collection. Two or four needles
will be used depending on the embroidery
design.
6. Thread your machine and add a heavy-weight
water soluable stabilizer underneath the
hoop. The next color block will baste the new
stabilizer together with the hooped fabric.
7. Trim any remaining threads and remove the cut
fabric. (Illustration 2)
8. Finish your embroidery.
&OHDQWKHEREELQDUHDDIWHUÀQLVKLQJ\RXU
design. (Illustration 3)
Tips!
• Always have your Embroidery Collection close
at hand when stitching a cutwork embroidery.
The Embroidery Collection will tell you when to
use the cutwork needles.
• If you see illustration no. 4 in the Embroidery
Collection, the embroidery is a cutwork needle
embroidery.
• Some embroideries cannot be rotated or
mirrored. If you see illustration no 5 it mean
that you cannot rotate or mirror the embroidery.
• Most fabrics that are suitable for cutwork will
work with the Cutwork Needles. Try a small
embroidery on the fabric before starting on your
actual project.
• For an even better result you can use the
straight stitch needle plate.
1
2
3
4
5