Pfaff creative icon Скачать руководство пользователя страница 78

Страница: 78 / 211

SewNotice App

With the SewNotice app in your mobile device your

creative icon™

machine can send messages to you

when it needs attention. Download the SewNotice app
to your mobile device at App Store or Google Play. You
can also download the app via the

mySewnet

™ portal at

pfaff.mysewnet.com.

The app will display current embroidery status:

• All color blocks in loaded design(s).

• Current stitch number and current color block

• Machine pop-up messages such as thread color

change and bobbin thread low.

Troubleshooting Connectivity

The Machine Cannot Connect to a WiFi Network

The machine will not connect to a WiFi network

Make sure that WiFi is enabled on your machine. Touch
the WiFi icon in the Information Area to open WiFi
Settings.

Make sure that the machine detects a signal from your
WiFi network. If there is no signal, move the machine
closer to the WiFi router.

Make sure you have selected your WiFi network.

The machine has no Internet connection

Make sure that your WiFi router has access to the
Internet.

The WiFi network is password protected

Make sure that you have selected your WiFi network
and entered the correct password. If you do not know
the password, contact the administrator of your network.

The Machine Cannot Synchronize with the

mySewnet

™ cloud

The machine cannot synchronize files with the

mySewnet

™ cloud

Make sure that you have a working WiFi connection.

Make sure that you have signed in to your

mySewnet

™

account. New

mySewnet

™ accounts are registered in the

machine or at pfaff.mysewnet.com

Make sure that there is available space on the

mySewnet

™ cloud.

If the

mySewnet

™ cloud is not accessible although you

have checked the WiFi connection, the server could
temporarily be unavailable. Please try again later.

Содержание creative icon



















































































































































































































Результаты поиска

Содержание creative icon

Отзывы:

Pfaff creative icon, Руководство пользователя, Страница: 78 / 211

Результаты поиска

Содержание creative icon

Отзывы: