Pfaff creative icon Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 211

Pop-up Messages in Sewing

Bobbin Thread Low

When the bobbin thread is running low, a pop-up
message appears giving you notice that you will soon
need to replace the bobbin. If you want to continue
sewing without replacing the bobbin, touch the foot
control and do not close the pop-up.

When the bobbin is replaced with a full one, touch OK
in the pop-up.

Check Upper Thread

The machine stops automatically if the upper thread
runs out or breaks. Re-thread the upper thread, close the
pop-up message and start sewing.

Remove Sensormatic Buttonhole Foot

The Sensormatic Buttonhole Foot needs to be removed
before doing any of the following:

• Sewing a stitch that is not a buttonhole.

• Sewing a buttonhole that can not be sewn with the

Sensormatic Buttonhole Foot.

• Sewing an adjusted buttonhole saved without the

Sensormatic Buttonhole Foot in the

mySewnet

™ cloud

folder.

102

«
...
100
101
102
103
104
...
»

Содержание creative icon




















































































































































































































Отзывы:

Нет отзывов