Pfaff creative 4874 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 144

Pfaff creative 4874 Скачать руководство пользователя страница 88

6-2

Detachable thread stand

For deco cover sewing you need to use the
detachable thread stand. Insert the top
catches of the thread stand (27) into the
top slots on the rear cover and press the
bottom portion of the stand against the
cover. Push the detachable thread stand to
the right as far as it will go. Place one foam
pad (52) on each spool pin (50).

To remove, push the thread stand to the
left and pull upwards.

Deco Cover

Switching the machine to deco cover operation (progs. 24 - 30)

Detachable thread guide for top/deco
cover

Pull the thread guide slide up as far as
it will go and twist it until the locking
pommels click into place.

Place the detachable thread guide from
the accessory box on top of the ﬁ rst thread
guide.

Stitch program sticker

The top/deco stitch program sticker (25)
is located behind the front cover and
includes the following information:

1. Row: Stitch program number.

2. Row: Threading diagram for the

decorative thread guides.

3. Row: Tension setting in blue and

yellow, i.e. the blue and yellow thread
tension must be changed to this setting
manually.

4. Row: Stitch formation with needle

stitch line in grey.

1
2
3

4

«
...
86
87
88
89
90
...
»

Содержание creative 4874

















































































































































Отзывы:

Нет отзывов