Pfaff creative 4874, Инструкция по эксплуатации, Страница: 24 / 144

2-10
Threading (stitch programs 01-20)
Thread guides
Slide the thread stand (49) backwards and
pull the thread guide (44) up as far as it
will go.
Place the spools on the spool pins (50). For
notes on the spool net, the thread run-off
disc, the foam pads and the cone holders,
please see page 2-5. Thread the threads
from the back to the front through the
thread guides (43) as indicated by the color
codes.
Lift the carrying handle (3). Thread the
threads underneath the carrying handle
into the rear thread guides (58). To do this,
pull the thread down with both hands
until it slips under the thread guide. Pass
the thread between the tension discs and
pull it down so that it is between the
tension discs. Fold the carrying handle
forwards.
Thread single threads in order from 1 to 5.
The open thread guides make threading
easy. To ease the task further, use the
tweezers located behind the swivel table.
Remove the trim catcher and open the
front cover.
Note: The thread tensions for
threading are shown in the
LCD display (9) (see page 3-5).
The sticker behind the front
cover is also provided to make
threading easier.
4
5 1
2
3