
1
coverlock 4.
0
1
2
3
9
4
5
6
7
8
9
10
5
2
B
A
C
Threading
14
7KUHDGLQJWKHORZHUORRSHU\HOORZ
• Raise the presser foot to release tension discs.
• Pass the thread from back to front through the thread
JXLGHRQWKHWKUHDGVWDQG
• Thread the top cover thread guide by pulling the
thread towards the right until it slips under the guide.
Then pull the thread along the right side of the button
DVLOOXVWUDWHG
• Lift up the handle and bring the thread under it. While
holding the thread with both hands, pass it between
the tension discs and pull it down to make certain it is
SURSHUO\SODFHGEHWZHHQWKHWHQVLRQGLVFV
• Turn the handwheel toward you until the lower looper
H[WHQGVRXWPPµ
from the needle plate edge.
• Thread the looper area of the machine following the
\HOORZFRORUFRGHGWKUHDGJXLGHV
3ODFHWKHWKUHDGWKURXJKWKUHDGLQJJXLGH
• Place the thread through the right slot of threading
JXLGH
7RWKUHDGWKHODVWWKUHDGJXLGHSXOODERXWFP
µRIWKUHDGWKURXJKWKHJXLGH
7LS0RYLQJWKHVWLWFKÀQJHUOHYHUWR5PDNHVWKHWKUHDGLQJ
HDVLHU5HPHPEHUWRVHWLWEDFNWR1EHIRUHVWDUWLQJWRVHZ
7KUHDGWKHORRSHUH\H$IURPIURQWWREDFNXVLQJ
WKHWZHH]HUV0DNHVXUHWKHWKUHDGUXQVLQWRWKH´9µ
FXWRXWV%RQWKUHDGHUOHYHU)LUPO\KROGWKHWKUHDG
WDLOZLWKOHIWKDQGDQGSXOOWKHWKUHDGHUOHYHU&XS
into place and back to snap the thread into thread
guide 9.