Heat sealing
10 - 4
10
.03
Malfunctions
Fig. 10 - 03
100-052
1
If malfunctions occur during the sealing sequence, e.g. if the hot air pressure is too low
(< 0.2 bar), diode
1
flashes rapidly.
●
Eliminate the cause of the malfunction.
●
Acknowledge the malfunction by switching the machine off and then on again.
Error messages on the display
Fig. 10 - 04
100-058
Display
Remedy
1999
Change the temperature sensor, see
Chapter 12.08 Changing the
temperature sensor.