9 - 1
Setting up
62-005
9
Setting up
All regulations and instructions in this service manual must be observed.
Special attention must be paid to all safety regulations!
All setting up work is only to be carried out by appropriately trained personnel.
For all setting up work the machines must be disconnected from the mains by
operating the main switch or by pulling out the plug.
9
.01
Inserting the needle
Switch off the machine!
Danger of injury if the machine
is started accidentally!
Only use needles from the
system intended for the
machine, see
Chapter 3
Specifications.
●
Raise the needle bar to its highest
position and loosen screw
1
.....
●
Insert needle
2
as far as possible into the
needle bar (the long needle groove must
be facing right).
●
Tighten screw
1
.
Fig. 9 - 01
1
2