Pfaff 3371-10 series, Руководство по настройке, Страница: 7 / 50

Adjustment
4
●
If necessary, enter the access code, see Chapter 11.05.01 Entering the access code in
the instruction manual.
●
With the corresponding +/- key move the button clamp drive unit in accordance with
requirement 1 , also see Chapter 11.03 Parameter input .
●
Switch off the machine.
●
Remove adjustment gauge 1.
●
Fit the lower feed plate and button clamp holder.
If, during the fine adjustment, the setting is ± 5 increments above or below the
value in X- and Y-direction , the setting should be checked again in accordance
with requirement 2 .