Pfaff 300 e, Руководство пользователя, Страница: 29 / 48

27
CONNECTIVITY TO
YOUR COMPUTER
Send
Click on Send to transfer the embroidery on the screen to
the embroidery machine, ready to be stitched out.
A message box will appear with the following options:
Quick Send and Send to Machine Memory.
QuickSend
QuickSend will send the embroidery directly to the 3D Intro
Navigator, ready for stitching out. If it is partially stitched
out in 3D Intro Navigator, you will be asked if you want to
replace the existing embroidery.
3D Intro Navigator appears, showing the status of the
upload. After the upload, your embroidery is shown on the
3D Intro Navigator screen, so that you can start to stitch it
out again later, if desired.
Send to Machine Memory
Send the embroidery to the machine memory without
loading the embroidery in 3D Intro Navigator. Use this if you
are already stitching out an embroidery or if you wish to
stitch out the embroidery at a later time. 3D Intro Navigator
appears, showing the status of the upload. When you are
ready to stitch out the embroidery, use 3D Intro Navigator
to select the embroidery from the machine memory.
Navigator is the part
of the software that
communicates with
the machine.