manualshive.com logo in svg

Pfaff 2571ME PREMIUM, Руководство по обслуживанию, Страница: 57 / 64

Поделиться
Скачать
Pfaff 2571ME PREMIUM Скачать руководство пользователя страница 57

 

57

 

 

Adjustment

The software update is carried out, the update progress is shown on the bar display of 

the PFP boot program.

 

●

During the up-dating procedure the machine must not be switched off.

 

●

When the update has been completed, switch off the machine and end the PFP boot pro-
gram.

 

●

End the connection between the PC and the machine control unit and reconnect the con-
trol panel to the machine control unit.

 

●

Switch on the machine.

A plausibility control is carried out and, if necessary, a cold start. 

More information and assistance is at your disposal in the fi le "PFPHILFE.TXT", 

which can be called up from the PFP boot program by pressing the "help" but-

ton.

1

.11.02 

Updating 2500 PREMIUM 

(with SD card)

 

●

After downloading the PFP tool and the control software, open the PFP program.

 

●

Select the machine type and under control unit SD-CARD.

 

●

The software version is displayed under report.

2591

SD-CARD

Ausgewählt:

Maschinentyp: 2591

Steuerung: P321

Softwareversion: 

79-0011 0389/001

 

●

Under 

programming

 copy the software to the drive with the SD-card.

 

●

With the machine switched off insert the SD-card into the control panel.

To update the machine software carry out the following steps:

While the machine software is being updated, no setting up, maintenance or 

adjustment work may be carried out on the machine! 

Содержание 2571ME PREMIUM

































































Отзывы:

Нет отзывов