Pevino PNG180D, Инструкция по эксплуатации

Страница: 5 / 41

5
INSTRUCTIONS FOR INSTALLING INTEGRATABLE WINE COOLERS:
ONLY FRONT-VENTILATED WINE COOLERS.
1. Intergrerable wine coolers are front ventilated and NOT built to be fully integrated behind a fixed external door
(e.g. a cabinet door in a kitchen)
2. Follow the installation diagram when installing the wine cooler. Never go below the minimum dimension
requirements.
3. The wine cooler draws air into the right side of the ventilation grate under the door and inflates on the left side
in the same place.
4. The wine cooler has an power on/off control panel.
5. The wine cooler must be connected to standard 240 volts/10 A.
6. The cord is 200 cm long and connected on the right side at the back.
7. In hot climate zones, a ventilation duct or grill with a minimum ventilation size of 200 mm x 50 mm shall be
cut out on the back of the housing or at the top of each side of the enclosure. This ensures the entry of fresh air
into the 30 mm deep space at the back of the enclosure. This air vent or grille must not be open to the same side
as other appliances such as ovens or the like. Also, do not open against an area that is without access to fresh,
cool air.
REMEMBER: The wine cooler must be placed so that there is access to power outlets after installation.