Pevino PNG180D, Инструкция по эксплуатации

Страница: 20 / 41

20
TROUBLE SHOOTING GUIDE
Common problems may easily be solved, saving you the cost of a possible service call. Please read carefully the
instruction manual and revert to troubleshooting guide chart.
PROBLEM POSSIBLE CAUSE
Wine cooler
does not
operate. Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Wine cooler is
not cold enough.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off
frequently.
The room temperature is hotter than normal.
A large amount of contents has been added to the wine cooler.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does
not work. Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is “OFF”.
Vibrations. Check to assure that the wine cooler is level.
The wine cooler
seems to make
too much noise. The rattling noise may come from the flow of the refrigerant, which is
normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your wine cooler.
Contraction and expansion of the inside walls may cause popping and
crackling noises.
The wine cooler is not level.
The door will
not close
properly. The wine cooler is not level.
The door was reversed and not properly installed.
The gasket is faulty. ( magnet or rubber is spoiled)
The shelves are out of position.