12
ADJUSTABLE WOODEN SHELVES
For easy access to the stored content, pull the shelves approximately 1/3 of its depth out of the rail
compartment. These wine cabinets, however, are designed with a notch on each side of the shelf tracks to
prevent bottles from falling.
When removing any of these shelves out of the rail compartment, tilt the shelf as per the diagram and simply
pull out, or push in the shelf until it sits on the support brackets securely.
Shelf installation and removal:
Shelf taking: According to below instruction drawing to pull out the shelf to support bracket
①
, press two sides
of sliding roller buckles and pull out the shelf following the arrow mark
②
.
Shelf installation: According to below instruction drawing to push in the shelf alignment with two sides of sliding
roller following the arrow mark
③
.
To prevent damaging the door gasket, make sure that the door is fully opened when pulling out the shelves.
VENTILATION FRAME INSTALLATION METHOD
1.Take out Ventilation frame from cabinet, then take out 4 pcs 4 * 12 screws from accessory bag.
2. Open the door, align the ventilation frame to the four screw holes in the bottom of the cabinet and tighten
the screw with Phillips screwdriver.
